Wuhan Chuyu Optoelectronic Technology Co., Ltd.
Dedicated in industrial laser welding system development & manufacturing for 10+ years
Add to Cart
High Power paint rust removal 200w 500w 1000w laser cleaning machine
(50w 100w 200w 500w optional)
As a green and environmentally friendly cleaning method, laser cleaning technology has the following advantages. Compared with traditional industrial cleaning, it has the following advantages. It has become an emerging laser cleaning technology that has attracted the attention of the automobile manufacturing, electronic processing, mold industry, petrochemical industry and other industries. :
1. No consumables, no chemical pollution, no noise, energy saving;
2. No contact, no grinding, no response, minimal loss to the substrate;
3. It can remove pollutant particles below the nanometer level and has high cleanliness;
4. Optical fiber transmission, movable operation, cleaning parts that are not easy to reach;
5. Simultaneous cleaning and simultaneous processing to achieve zero discharge in the cleaning process
6. Can achieve rapid cleaning of heavy pollutants and high-speed cleaning of light pollutants
Applicable Industries of laser cleaning machine:
Auto Part, Tyre mold, Rubber Mold, High level machine tools, Rail, Metal & Non-metal parts etc
Applicable Materials of laser cleaning machine:
Metal, Plastic, Rubber
Complete paint removal, Cleaning of large molds, Weld seam pre-treatment
Machine introduction
There is oxidation and corrosion when metals meet oxygen and water vapor in air. It will greatly damage the metal workpiece and the rust will spread from outside to inside and become worse and worse as time goes on, until the whole workpiece is totally corrupted. So rust removal is extremely important. Laser rust removal uses not chemical agents or mechanical polishing, so it is faster and safer.
100W Fiber Laser rust removal Machine is a new generation of industrial surface cleaning laser system. It adopts the advanced laser source, laser optical scanners and control system to meet the requirements of metal surface cleaning process.
Features
1. fiber laser high power laser cleaning machine
2. Non-contact cleaning, no damage to the parts matrix.
3. accurate cleaning, can achieve precise location, precise size selective cleaning.
4. do not need any chemical cleaning liquid, no consumables, safe and environmental protection.
5. simple operation, power can be hand-held or with the robot to achieve automated cleaning.
6. cleaning efficiency is very high, save time.
7. Laser cleaning system stability, maintenance-free.
Specifications:
| Model | CY-C60 | CY-C100 | CY-C200 | CY-C500 |
| Laser source | Fiber | Fiber | Fiber | Fiber |
| Laser Power | 60W | 100W | 200W | 500W |
| Fiber cable L | 3 M | 3 M | 5 M | 10M |
| Pulse Energy | 1.5 mJ | 1.5 mJ | 2 mJ | 50 mJ |
| Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
| Frequency | 50-500KHz | 50-200KHz | 20-50KHz | 10-50KHz |
| Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
| Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
| Cooling | Air cooling | Air cooling | Air cooling | Water cooling |
| Dimension | 450*350*500 | 650*350*560 | 900*600*1100 | 1600*1100*1800 |
| Weight | 30Kg | 40Kg | 120Kg | 300Kg |
| Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
| Optional | Manual | Manual | Manual | Manual |
| Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
| Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |